Ford 2010 Mondeo Owner'S Handbook Manual Download Page 102

Page: 102 / 304

2. Highlight

Settings

with the up and

down arrow buttons and press the
right arrow button.

3. Highlight

Information

with the up

and down arrow buttons and press
the right arrow button.

4. Highlight

Messages

and press the

right arrow button.

5. Use the up and down buttons to view

the current messages.

Active suspension

Action

Indicator

Message

Have the system checked by a properly trained

technician.

amber

IVDC malfunction

See

Active suspension

(page 157).

IVDC comfort

See

Active suspension

(page 157).

IVDC normal

See

Active suspension

(page 157).

IVDC sport

Airbag

Action

Indicator

Message

Have the system checked by a properly trained

technician as soon as possible.

amber

Airbag malfunction

Alarm

Action

Indicator

Message

See

Alarm

(page 46).

amber

Alarm triggered

Have the system checked by a properly trained

technician.

Alarm system

service reqd.

Automatic main beam control/Lane departure warning/Driver
alert

Action

Indicator

Message

The front camera sensor has reduced visibility.

Clean the windscreen.

amber

Front camera

Clean screen

100

Information displays

Summary of Contents for 2010 Mondeo

















































































































































































































































































































Search results

Summary of Contents for 2010 Mondeo

Reviews:

Brands by name

Popular brands

Ford 2010 Mondeo, Owner'S Handbook Manual

Search results

Summary of Contents for 2010 Mondeo

Reviews:

Brands by name

Popular brands