Ford 2010 Mondeo Page 60 Owner'S Handbook Manual Download

Page: 60 / 304

Note:

This is a temporary override and

the system will return to automatic
operation after a short period.

To permanently deactivate the system
use the information display menu or turn
the lighting control switch from autolamps
to headlamps.

FRONT FOG LAMPS

E70721

WARNING

Only use the front fog lamps when
visibility is considerably restricted by
fog, snow or rain.

REAR FOG LAMPS

E70720

WARNINGS

Only use the rear fog lamps when
visibility is restricted to less than 50
metres.

WARNINGS

Do not use the rear fog lamps when
it is raining or snowing and visibility
is more than 50 metres.

ADJUSTING THE
HEADLAMPS - VEHICLES
WITH: ADAPTIVE FRONT
LIGHTING/XENON
HEADLAMPS

To adjust the headlamps for driving on the
left or right hand side of the road, see your
dealer.

HEADLAMP LEVELLING

Note:

Vehicles with Xenon headlamps

are equipped with automatic headlamp
levelling.

E70722

Raised headlamp beams

Lowered headlamp beams

You can adjust the level of the headlamp
beams according to the vehicle load.

Lighting

Summary of Contents for 2010 Mondeo

















































































































































































































































































































Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands

Ford 2010 Mondeo, Owner'S Handbook Manual

Search results

Summary of Contents for 2010 Mondeo

Reviews:

Related manuals for 2010 Mondeo

Brands by name

Popular brands