manualshive.com logo in svg

Ford 2003 F250, Owner'S Manual

The Ford 2003 F250 Owner's Manual is an essential resource for any owner, providing detailed instructions for maintenance, troubleshooting, and vehicle operation. Obtain this comprehensive manual for free download at manualshive.com, empowering you with all the knowledge needed to maximize your F250's performance and longevity.

Share
Download
background image

When a wheel is installed, always remove any corrosion, dirt or
foreign materials present on the mounting surfaces of the wheel

or the surface of the front disc brake hub and rotor that contacts the
wheel. Installing wheels without correct metal-to-metal contact at the
wheel mounting surfaces can cause the wheel nuts to loosen and the
wheel to come off while the vehicle is in motion, resulting in loss of
control.

Stowing the flat/spare tire

Note:

Failure to follow spare tire stowage instructions may result in

failure of cable or loss of spare tire.

1. Lay the tire on the ground with the valve stem facing in the direction
specified on the Tire Changing Instructions located with the jack
hardware.

2. Slide the wheel partially under the vehicle and install the retainer
through the wheel center. Pull on the cable to align the components at
the end of the cable.

3. Turn the jack handle clockwise until the tire is raised to its stowed
position underneath the vehicle. The effort to turn the jack handle
increases significantly and the spare tire carrier ratchets or slips when
the tire is raised to the maximum tightness. Tighten to the best of your
ability, to the point where the ratchet/slip occurs, if possible. The spare
tire carrier will not allow you to overtighten. If the spare tire carrier
ratchets or slips with little effort, take the vehicle to your dealer for
assistance at your earliest convenience.

4. Check that the tire lies flat against the frame and is properly
tightened. Try to push or pull, then turn the tire to be sure it will not
move. Loosen and retighten, if necessary. Failure to properly stow the
spare tire may result in failure of the winch cable and loss of the tire.

5. Repeat this tightness check procedure when servicing the spare tire
pressure (every six months, per scheduled maintenance guide), or at any
time that the spare tire is disturbed through service of other
components.

6. If removed, install the spare tire lock (if equipped) into the bumper
drive tube with the spare tire lock key (if equipped) and jack handle.

2003 F250/350/450/550

(f23)

Owners Guide (post-2002-fmt)
USA English

(fus)

Roadside Emergencies

191

Summary of Contents for 2003 F250

























































































































































































































































































Reviews:

No comments

Related manuals for 2003 F250

PAC I GM3 Instruction Manual preview
I GM3
Brand: PAC Pages: 15
Dakota Digital Retrotech RTX-68D-CHG Quick Start Manual preview
Retrotech RTX-68D-CHG
Brand: Dakota Digital Pages: 4
Victory 4x4 UNI-UPRS Install Instructions Manual preview
UNI-UPRS
Brand: Victory 4x4 Pages: 13
TATA Motors tigor Owner'S Manual preview
tigor
Brand: TATA Motors Pages: 159
hc-cargo 171850 Mounting And Operation Instructions preview
171850
Brand: hc-cargo Pages: 60
Whipple TOMAHAWK V1 Instruction Manual preview
TOMAHAWK V1
Brand: Whipple Pages: 3
Nuna Bugaboo turtle Instructions For Installation Manual preview
Bugaboo turtle
Brand: Nuna Pages: 17
Opel 2013 Corsa Brochure & Specs preview
2013 Corsa
Brand: Opel Pages: 32
v.link NAL-PC-HSD Manual preview
NAL-PC-HSD
Brand: v.link Pages: 21
Xingyun XY40EV Service Manual preview
XY40EV
Brand: Xingyun Pages: 74
Oldsmobile Bravada 1997 Owner'S Manual preview
Bravada 1997
Brand: Oldsmobile Pages: 358
Carcomm CMPC-22 Fujitsu-Siemens PocketLoox 410 Installation Manual preview
CMPC-22 Fujitsu-Siemens PocketLoox 410
Brand: Carcomm Pages: 2
TracRac TracONE Installation Instructions Manual preview
TracONE
Brand: TracRac Pages: 8
TOGU Airgo Active cushion / Comfort Manual And Maintenance Instructions preview
Airgo Active cushion / Comfort
Brand: TOGU Pages: 2
Federal Signal Corporation Cuda TriOptic 351014F Series Instruction Sheet preview
Cuda TriOptic 351014F Series
Brand: Federal Signal Corporation Pages: 4
Kia Magentis 2002 Owner'S Manual preview
Magentis 2002
Brand: Kia Pages: 216
Cadillac CTS 2011 Manual preview
CTS 2011
Brand: Cadillac Pages: 78
Lincoln 2011 navigator Manual preview
2011 navigator
Brand: Lincoln Pages: 370

Brands by name

Popular brands

Load more brands