Ford 2003 F250 Owner'S Manual Download

Page: 91 / 280

Never place your arm over the air bag module as a deploying air
bag can result in serious arm fractures or other injuries.

To properly position yourself away from the air bag:

•

Move your seat to the rear as far as you can while still reaching the
pedals comfortably.

•

Recline the seat slightly one or two degrees from the upright position.

Do not put anything on or over the air bag module. Placing
objects on or over the air bag inflation area may cause those

objects to be propelled by the air bag into your face and torso causing
serious injury.

Do not attempt to service, repair, or modify the air bag
supplemental restraint systems or its fuses. See your Ford or

Lincoln Mercury dealer.

The front passenger air bag is not designed to offer protection to
an occupant in the center front seating position.

Modifying or adding equipment to the front end of the vehicle
(including frame, bumper, front end body structure and tow

hooks) may affect the performance of the air bag system, increasing
the risk of injury. Do not modify the front end of the vehicle.

Additional equipment such as snowplow equipment may effect
the performance of the air bag sensors increasing the risk of

injury. Please refer to the Body Builders Layout Book for instructions
about the appropriate installation of additional equipment.

Removing the blocker beam without installing snow plow
attachment hardware may effect air bag deployment in a crash.

Do not operate the truck unless either the blocker beam or snow plow
attachment hardware is installed on the vehicle.

2003 F250/350/450/550

(f23)

Owners Guide (post-2002-fmt)
USA English

(fus)

Seating and Safety Restraints

Summary of Contents for 2003 F250

























































































































































































































































































Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands

Ford 2003 F250, Owner'S Manual

Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands