Ford 2003 F250 Owner'S Manual Download | Manualshive

Page: 232 / 280

background image

Repairs to correct the effects of using a fuel for which your vehicle was
not designed may not be covered by your warranty.

Octane recommendations

Your vehicle is designed to use
“Regular” unleaded gasoline with
pump (R+M)/2 octane rating of 87.
We do not recommend the use of
gasolines labeled as “Regular” that
are sold with octane ratings of 86 or lower in high altitude areas.

Do not be concerned if your engine sometimes knocks lightly. However, if
it knocks heavily under most driving conditions while you are using fuel
with the recommended octane rating, see your dealer or a qualified
service technician to prevent any engine damage.

Fuel quality

If you are experiencing starting, rough idle or hesitation driveability
problems during a cold start, try a different brand of unleaded gasoline.
“Premium” unleaded gasoline is not recommended for vehicles designed
to use “Regular” unleaded gasoline because it may cause these problems
to become more pronounced. If the problems persist, see your dealer or
a qualified service technician.

It should not be necessary to add any aftermarket products to your fuel
tank if you continue to use high quality fuel of the recommended octane
rating. Aftermarket products could cause damage to the fuel system.
Repairs to correct the effects of using an aftermarket product in your
fuel may not be covered by your warranty.

Many of the world’s automakers approved the World-wide Fuel Charter
that recommends gasoline specifications to provide improved
performance and emission control system protection for your vehicle.
Gasolines that meet the World-wide Fuel Charter should be used when
available. Ask your fuel supplier about gasolines that meet the
World-wide Fuel Charter.

Cleaner air

Ford endorses the use of reformulated “cleaner-burning” gasolines to
improve air quality.

Running out of fuel

Avoid running out of fuel because this situation may have an adverse
affect on powertrain components.

87

(R+M)/2 METHOD

2003 F250/350/450/550

(f23)

Owners Guide (post-2002-fmt)
USA English

(fus)

Maintenance and Specifications

232

«
...
230
231
232
233
234
...
»

Summary of Contents for 2003 F250

























































































































































































































































































Reviews:

No comments

Related manuals for 2003 F250

Brand: ULTIMATE SPEED Pages: 19

Brand: IAME Pages: 17

V2 SUPERCHARGER

Brand: Tesla Pages: 9

Brand: Allen Sports Pages: 2

Brand: Brodit Pages: 2

Brand: Mercedes-Benz Pages: 368

Brand: Ecco Pages: 24

1996-2008 Crown Victoria Driver and Passenger - Trunk Side Mounts C-TSM-CV-P

Brand: Havis-Shields Pages: 1

Brand: Rugged Ridge Pages: 3

Brand: Cadillac Pages: 20

Brand: Paser Pages: 2

Brand: Xblitz Pages: 56

A-18 TRAILER ABS

Brand: BENDIX Pages: 40

Brand: Toyota Pages: 56

Brand: Renault Pages: 198

Brand: Xpresskit Pages: 12

Performer-Plus 2172

Brand: Edelbrock Pages: 4

Brand: iQOS Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands