Ford 2003 F250 Owner'S Manual Download

Page: 44 / 280

Handle a halogen headlamp bulb carefully and keep out of
children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to
break the next time the headlamps are operated.

Install the new bulb(s) in reverse order.

Replacing headlamp bulbs (sealed beam)

1. Make sure headlamp switch is in OFF position and open the hood.

2. Remove the two screws and
parking lamp/side marker assembly
by pulling gently

3. Disconnect the electrical
connectors from the parking
lamp/side marker assembly and
remove.

4. Remove the four bolts and
headlamp bezel.

5. Remove the four screws and the
headlamp retaining ring from
headlamp.

6. Disconnect the electrical
connector and remove headlamp.

Install the new bulb(s) in reverse order.

2003 F250/350/450/550

(f23)

Owners Guide (post-2002-fmt)
USA English

(fus)

Lights

Summary of Contents for 2003 F250

























































































































































































































































































Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands

Ford 2003 F250, Owner'S Manual

Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands