Ford 2003 F250 Owner'S Manual Download

Page: 195 / 280

3. Once the disabled vehicle has been started, run both engines for an
additional three minutes before disconnecting the jumper cables.

Removing the jumper cables

Remove the jumper cables in the reverse order that they were
connected.

1. Remove the jumper cable from the

ground

metal surface.

Note:

In the illustrations,

lightning bolts

are used to designate the

assisting (boosting) battery.

2. Remove the jumper cable on the negative (-) connection of the
booster vehicle’s battery.

–

2003 F250/350/450/550

(f23)

Owners Guide (post-2002-fmt)
USA English

(fus)

Roadside Emergencies

195

Summary of Contents for 2003 F250

























































































































































































































































































Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands

Ford 2003 F250, Owner'S Manual

Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands