Ford 2003 F250 Owner'S Manual Download

Page: 50 / 280

ILLUMINATED VISOR MIRROR (IF EQUIPPED)

Lift the mirror cover to turn on the
visor mirror lamps.

OVERHEAD CONSOLE (IF EQUIPPED)

The appearance of your vehicle’s overhead console will vary according to
your option package.

Storage compartment (if equipped)

Press the OPEN control to open the
storage compartment. The door will
open slightly and can be moved to
full open.

The storage compartment may be
used to secure sunglasses or a
similar object.

Install a garage door opener (if equipped)

The storage compartment can be used to hold a variety of aftermarket
garage door openers. To install your garage door opener:

1. Open the storage compartment
door.

2. Remove the storage clip and stow
it away.

3. Place the Velcro

娂

strip onto the

back of the garage door opener
control.

4. Adhere the back of garage door
opener control to the Velcro

娂

strip

found inside the storage
compartment. Make sure that the controls for the garage door opener
face outward.

2003 F250/350/450/550

(f23)

Owners Guide (post-2002-fmt)
USA English

(fus)

Driver Controls

Summary of Contents for 2003 F250

























































































































































































































































































Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands

Ford 2003 F250, Owner'S Manual

Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands