Ford 2003 F250 Page 14 Owner'S Manual Download

Page: 14 / 280

Safety belt:

Reminds you to fasten

your safety belt. A chime will also
sound to remind you to fasten your
safety belt.

Charging system:

Illuminates when

the battery is not charging properly.

Low fuel:

Illuminates when the fuel

level in the fuel tank is at or near
empty (refer to

Fuel gauge

in this

chapter).

Speed control:

Illuminates when

the speed control is activated. Turns
off when the speed control system
is deactivated.

Transmission Tow/Haul Feature
(5–speed automatic
transmission) (if equipped):

The

ON light on the end of the gearshift
lever illuminates when the Tow/Haul
feature has been selected. Refer to the

Driving

chapter for transmission

function and operation. If the light flashes steadily, have the system
serviced immediately, damage to the transmission could occur.

Transmission control indicator
light (TCIL) (4–speed automatic
transmission) (if equipped):

Illuminates when the overdrive
function of the transmission has
been turned OFF, refer to the

Driving

chapter. If the light flashes

steadily, have the system serviced immediately, damage to the
transmission could occur.

Four wheel drive low
(if equipped):

Illuminates when

four-wheel drive low is engaged.

OVERDRIVE

LOW

RANGE

2003 F250/350/450/550

(f23)

Owners Guide (post-2002-fmt)
USA English

(fus)

Instrument Cluster

Summary of Contents for 2003 F250

























































































































































































































































































Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands

Ford 2003 F250, Owner'S Manual

Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands