Ford 2003 F250 Owner'S Manual Download

Page: 64 / 280

TAILGATE LOCK (IF EQUIPPED)

Your vehicle may be equipped with a
tailgate lock designed to prevent
theft of the tailgate.

•

Insert ignition key and turn to the
right to engage lock.

•

Turn ignition key to the left to
unlock.

Tailgate removal

Your tailgate is removable to allow
more room for loading.

1. Lower the tailgate.

2. Use a screwdriver to pry the
spring clip (on each connector) past
the head of the support screw.
Disconnect cable.

3. Disconnect the other cable.

4. Lift tailgate to a 45 degree angle.

5. Lift right side off of its hinge.

6. Lift left side off of its hinge.

To install, follow the removal procedures in reverse order.

2003 F250/350/450/550

(f23)

Owners Guide (post-2002-fmt)
USA English

(fus)

Driver Controls

Summary of Contents for 2003 F250

























































































































































































































































































Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands

Ford 2003 F250, Owner'S Manual

Search results

Summary of Contents for 2003 F250

Reviews:

Related manuals for 2003 F250

Brands by name

Popular brands