FOR-A FA-10DCCRU, Operation Manual

Page: 148 / 300

132
8-2. EVENT SAVE
E V E N T S A V E 1 9 2
N O . : V I D E O F O R M A T
L O A D S T A R T F 2 U N I T Y
F O R M A T : 1 0 8 0 / 5 9 i
Parameter Default Setting range Description
NO.
VIDEO
FORMAT
VIDEO FORMAT
*1
EVENT1 - EVENT100
Selects the number of an event you
want to save.
LOAD START
F2 UNITY
- -
Saves the event that is selected
under NO. when the F2 UNITY
button is pressed.
- - - Displays the signal format if NO. is
set to VIDEO FORMAT.
*1 VIDEO FORMAT saves settings to memory for the respective video formats the FA-9500
uses. The current video format is displayed on the third row.
The EVENT SAVE menu is disabled and appears as shown below if AUTO LOAD is set to
ENABLE in the EVENT SETUP menu (8-3). To enable the EVENT SAVE menu, set AUTO
LOAD to DISABLE.
E V E N T S A V E 1 9 2
N O . : - - - -
A U T O L O A D E N A B L E !
8-3. EVENT SETUP
E V E N T S E T U P 1 9 3
S T A R T : L A S T S E T T I N G
A U T O L O A D : D I S A B L E
Parameter Default Setting range Description
START
LAST
SETTING
LAST SETTING
VIDEO
FORMAT
DEFAULT
EVENT1 -
EVENT100
Selects an event you want to load at
startup.
LAST SETTING : Loads the last settings
that are used before startup.
VIDEO FORMAT : Loads the settings that
are stored in event memory for the last
format that is detected before startup.
DEFAULT: Resets all settings to the default
settings at startup.
EVENT1 - 100 : Loads the selected event
memory among event memory settings 1
through 100.
AUTO LOAD DISABLE
DISABLE
ENABLE
ENABLE: Loads the respective video
format settings. If the video input is changed
to a different format, the settings of the
changed format will be loaded.
NOTE
Events 1 through 100 can be renamed. See Set Event Name in section 9-6-1 “Event
Control” for details.
Menu button
EVENT
Menu button
EVENT