FOR-A FA-10DCCRU Operation Manual Download Page 231

Page: 231 / 300

215

9-7. Status Display

Click the

Status

tab at the top of the page. The Unit/Video Status page will be displayed. To go to

the Audio Status page, click

Audio Status

at the top left of the page. In the same way, click

Unit/Video Status

to go to the Unit/Video Status page, and click

Unit Information

to go to the

Unit Information page. Click

Changeover Status

to go to the Changeover Status page. The

Changeover Status page will open only if the FA-95CO option is installed.

9-7-1. Unit/Video Status

The video and unit statuses are shown on the Unit/Video Status page.

If the user name and password are not set in the USER SETTING page (see section 9-8-5),
the

Logout

is not shown. Click

Refresh

to refresh the page.

Click

Summary of Contents for FA-10DCCRU













































































































































































































































































































Search results

Summary of Contents for FA-10DCCRU

Reviews:

FOR-A FA-10DCCRU, Operation Manual, Page: 231 / 300

Search results

Summary of Contents for FA-10DCCRU

Reviews: