FOR-A FA-10DCCRU, Operation Manual, Page: 282 / 300

266
 CONV1 and CONV2 operation mode settings
 Set the AFD auto-conversion mode for CONV 1 in CONV1 U/D MODE (Sec. 5-3-5).
 Set the AFD auto-conversion mode for CONV 2 in CONV1 U/D MODE (Sec. 5-3-5).
 AFD output verification
AFD data status in CONV1 and CONV2 output video signals can be verified as follows:
 The CONV1 ANC OUT menu (Sec. 5-16) allows you to verify whether and in which line
the VI and WSS data has been inserted into CONV1 output video signals.
 VI and WSS output data details can be seen in CONV1 VI OUT (5-16-2), and CONV2
WSS OUT (5-16-3).
 S2016-3 output data details can be seen in CONV1 S2016 OUT (Sec. 5-16-1).
 Into which line S2016-3 is inserted can be seen in CONV1 ANC OUT1 (Sec. 5-17).
AFD data status in CONV2 output video signals can be verified in CONV2 ANC OUT (Sec.
5-18) and CONV2 ANC OUT1 (Sec. 5-19) in the same manner.
20-5. How to Insert AFD Data to Output Video Signals
FA-9500 can insert AFD data into input video signals that have no AFD data inserted.

AFD system settings
To insert AFD data into output video signals, set basic operational settings in the VIDEO SYTEM
menus as follows.
 Set ANC MODE to DETAIL in CONV1 ANC SET (Sec. 5-10-9).
 Set ANC MODE to DETAIL also in CONV2 ANC SET (Sec. 5-10-10).
 Select the AFD data to insert, and which output to insert the data in ANC DATA EMBED
(Sec. 5-10-16). These settings are necessary when inserting AFD data into video signals
to be output from CONV1 and/or 2.
 To enable devices that receive signals from FA-9500 to detect ancillary data, select the
ancillary data type, output video format/s for CONV1 and/or 2 output/s, and line number
into which the data is to be inserted in ANC EMBED LINE (Sec. 5-10-17). The default
setting should be set to the line number usually used.
 CONV1 and CONV2 operation mode settings
 Set the converter operation mode for CONV1 in CONV1 U/D MODE (Sec. 5-3-5).
 Set the specific aspect ratio under ASPECT in CONV1 U/D MODE (Sec. 5-3-5). Select an
aspect ratio from among 4:3 L 16:9 T to 16:9F ALT4:3 for SD-SDI output video signals
from CONV1. Select from among 16:9 L>16:9 to 16:9F ALT4:3 for HD-SDI output video
signals from CONV1.
Set the aspect ratio for CONV2 in the same manner as above in CONV2 U/D MODE (Sec.
5-4-1).
 AFD output verification
AFD data status in CONV1 and CONV2 output video signals can be verified as follows:
 The CONV1 ANC OUT menu (Sec. 5-16) allows you to verify whether and in which line
the VI and WSS data has been inserted into CONV1 output video signals.
 VI and WSS output data details can be seen in CONV1 VI OUT (5-16-2), and CONV2
WSS OUT (5-16-3)..
 S2016-3 output data details can be seen in CONV1 S2016 OUT (Sec. 5-16-1).
 Into which line S2016-3 is inserted can be seen in CONV1 ANC OUT1 (Sec. 5-17).
AFD data status in CONV2 output video signals can be verified in CONV2 ANC OUT (Sec.
5-18) and CONV2 ANC OUT1 (Sec. 5-19) menus in the same manner.