FOR-A FA-10DCCRU Operation Manual Download Page 192

Page: 192 / 300

176



Down Mix Assign

Parameter

Default

Setting range

Description

Left

Right

Center

Left Surround

Right Surround

Left: Source CH1
Right: Source CH2
Center: Source CH3
Left Surround: Source CH5
Right Surround: Source CH6

Source CH

1-16

Selects audio signals that are

selected for SOURCE channels

1 through 16 in the Source

Select men u (9-3-4) for the

channels to be downmixed.
Which input audio signal is

used for the SOURCE channel

is displayed as (SDI CH1).

* If the same SOURCE channel is selected for multiple channels among the above, or

NON-PCM signal is assigned to a Source channel, Down MIX-L and Down MIX-R will be
muted.

* The downmixed audio signals are output as Down Mix-L, and R.

NOTE

To embed downmixed audio signals, Down Mix -L and R, see section 9-3-11 "SD I
Audio Output Setting”. To output downmixed audio signal from AES connectors, see
section 9-3-12 “AES Au dio Output Setting”. To output from the analog audio output
connectors, see section 9-3-13 “Analog Audio Output Setting”.
To change the Source signal assignments, see section 9-3-4 “Source Select”.

Summary of Contents for FA-10DCCRU













































































































































































































































































































Search results

Summary of Contents for FA-10DCCRU

Reviews:

FOR-A FA-10DCCRU, Operation Manual, Page: 192 / 300

Search results

Summary of Contents for FA-10DCCRU

Reviews: