FOR-A FA-10DCCRU, Operation Manual

Page: 68 / 300

52
5-7-9. AUDIO LOSS TRG
This menu is accessible only if the FA-95CO software option is installed.
A U D I O L O S S T R G 6 0
G R O U P S E L : G R O U P 1
T R I G G E R : D I S A B L E
D U R A T I O N : 0 . 0 s e c
C H G O V D I S A B L E D
Parameter Default
Setting range
(Steps)
Description
GROUP SEL GROUP1 GROUP 1 to 4
Selects a group from the embedded
audio for which to set the trigger.
TRIGGER DISABLE
DISABLE
ENABLE
Enables or disables auto changeover
for signal loss of SDI embedded audio.
DURATION 0.0sec
0.0 to 1.0sec
(0.1sec)
Sets the detected SDI embedded audio
signal loss duration required to trigger a
changeover.
This setting will be shared by all 4 audio
groups.
* The “CHGOV DISABLED” message is displayed if CHANGEOVER is disabled in the
VIDEO INPUT SET (5-7-1) menu or VIDEO TRG is disabled in the CHGOV
(CHANGEOVER) MODE SET (5-7-4) menu. If this message is displayed, a changeover
will not be performed even though AUDIO LOSS TRG is enabled.
5-7-10. AUDIO ERR TRG
This menu is accessible only if the FA-95CO software option is installed.
A U D I O E R R T R G 6 1
C H S E L : C H 1
T R I G G E R : D I S A B L E
D U R A T I O N : 0 . 0 s e c
C H G O V D I S A B L E D
Parameter Default
Setting range
(Steps)
Description
CH SEL CH1 CH 1 to 16
Selects a channel from the embedded
audio for which to set the trigger.
TRIGGER DISABLE
DISABLE
ENABLE
Enables or disables auto changeover for
errors listed below.
- DBN (Data Block Number) discontinuity
- Channel status discontinuity
- HD audio clock data error or change
DURATION 0.0sec
0.0 to 1.0sec
(0.1sec)
Sets the detected audio error duration
required to trigger a changeover.
This setting will be shared by all 16
channels.
* To avoid an unexpected changeover
triggered by a switchover of input signals
via router, set DURATION to longer than
0.2 sec..
* The “CHGOV DISABLED” message is displayed if CHANGEOVER is disabled in the
VIDEO INPUT SET (5-7-1) menu or VIDEO TRG is disabled in the CHGOV
(CHANGEOVER) MODE SET (5-7-4) menu. If this message is displayed, a changeover
will not be performed even though AUDIO ERR TRG is enabled.
* AUDIO ERR TRG also triggers a changeover for SDI input signal loss. If AUDIO ERR TRG
is enabled and the SDI signal input is lost, a changeover will be performed, even though
AUDIO LOSS TRG is disabled, based on the AUDIO ERR TRG DURATION setting.
Menu button
IN SEL
DOWNMIX
Menu button
IN SEL
DOWNMIX