FOR-A FA-10DCCRU, Operation Manual

Page: 220 / 300

204
NOTE
If CEA608 or S334-1 CC closed caption data is detected in the 525/60 input signal,
and the CONV1 and/or CONV2 output format/s is/are 1080/59i and/or 720/59p, the
detected closed caption data will not be converted to CEA708. The CEA708 closed
caption data insertion will be automatically terminated.
Meanwhile, if CEA708 closed caption data is detected in the 1080i or 720/59p
HD-SDI input signal, it will be converted to S334-1 CC and CEA608CC for 525/60
output signals to output from Converter 1 and/or Converter 2.
IMPORTANT
Closed caption data output in SD-SDI signal ancillary data space will stop when data
input is lost.
S2016-3 AFD, RP186 VI, and BT1119 WSS ancillary data will output according to the
ANC LOSS SET settings when their data input is lost. See section 5-10-18 “ANC
LOSS SET” for details.
 Ancillary data combinations that cannot be simultaneously embedded to the same
line
Video
format Ancillary data type S334-1 CC
S2016-3 AFD RP186 VI BT1119 WSS
525/60
S2016-3 CC
Unable to set
to same line
S2016-3 AFD
Unable to set
to same line
RP186 VI
Unable to set
to same line
Unable to set
to same line
625/50
S2016-3 AFD
Unable to set
to same line
Unable to set
to same line
RP186 VI
Unable to set
to same line
BT1119 WSS
Unable to set
to same line
If the same line is set for the ancillary data types described as “Unable to set to same line”
combination, and both ancillary data types are set to be embedded in the 5-10-16 ANC DATA
EMBED menu, the error message “Identical ANC line location settings!” will appear. If the
message is displayed, ancillary data will not be properly embedded. The line settings must be
properly set. Usually the default value will properly embed the ancillary data. Keep this in mind
when changing the value to configure a system with other devices.