Fona Aquamarine, Operating Instructions Manual

Page: 41 / 78

Operating Instructions
båÖäáëÜ
cê~å´~áë
41
Decreased preset parameter
White vertical bar left to the parameter
Increased preset parameter
White vertical bar right to the parameter
NOTICE
Alphabetic and numeric letters, limitation to data input:
• Numbers are displayed with English decimals '.' for all languages/
regions.
• The power is displayed with one decimal place. Unit is watt (W).
• The time can be set-up as continuous or 1 to 9999 seconds. If
continuous is selected it counts up to maximum 9999 seconds after
activating application. If time is fixed it counts down. Unit is seconds (s).
If 9999 is exceeded treatment will stop and display jumps back to
treatment screen.
• The duty cycle is displayed in 10% steps, from 10% to 100% without
unit. 100% is displayed as CW.
• The frequency can be entered by moving higher or lower by using 'plus'
or 'minus'. When using 'plus' or 'minus' the frequency will be set in
increments of 10 Hz at the beginning. When the buttons are pressed for
longer the increments will be bigger. If 0 Hz is set, CW is displayed. Unit
is Hertz (Hz).
• The average power will automatically be calculated and displayed with
one decimal place. Unit is watt (W).
Clear screen before entering new parameters or data. Existing entries
will not be overwritten.
Changed parameters of preset applications will be marked with vertical
bars next to the parameter. A vertical bar right to the parameter indicates
that the preset parameter has been increased, left to the parameter
indicates that it has been decreased.
The presets may only be changed/adapted by experienced laser users.