Fona Aquamarine, Operating Instructions Manual

Page: 18 / 78

18
Aquamarine
3.3 Handpiece with integrated laser source
The laser source (diode) of the Aquamarine is integrated into the
handpiece of the unit, which makes optical lines inside the handpiece
cable obsolete.
The handpiece is magnetically held inside the handpiece holding. Without
fixed handpiece a weak magnetic field is measurable inside the
handpiece holding (well). Do not place a magnetic data medium in or
above the holding well. It could lead to data loss.
The handpiece has a passive cooling system to guarantee the cooling of
the laser source. The metal end of the handpiece serves as cooling
element. Therefore, it is normal that the metal part on the back of the
handpiece can get warm.
To guarantee that this part does not get too warm an automatic control is
integrated.
If the handpiece back is getting closer to the temperature limit, the unit
indicates that.
If the handpiece reaches the limit the unit will automatically interrupt the
laser emission. The handpiece than has to cool down.
Firing the laser with max. power is possible for 4 minutes continuously
until the laser emission will be interrupted.
3.4 Symbols and abbreviations
3.4.1 Symbols
Type B applied part according to IEC 60601-1
CE mark in accordance with Council Directive 93/42/EEC, stating the
manufacturer's Notified Body. Verifies the compliance of the Aquamarine
Date of manufacture: yyyy-mm-dd
Best before date – Do not use after: year-month
Batch number
Single-use fiber tip is sterile, sterilized with gas (ethylene oxide)
Single-use fiber tip is not sterile
Steripoint
®
as evidence of sterilization process
Filled with green dot: EO processed
Serial Number
Reference number
0123
XXXX / XX / XX
LOT
STERILE EO
NON
STERILE
SN