Foma N900i '04.2, Manual

Page: 92 / 388

90
Making/Receiving Videophone Calls
Videophone call functions
You can make various settings on videophone calls such as the size and quality of images you send.
Handsfree
※ : Sounds the other party’s voice from the speaker.
Front camera/Rear camera ※ : Sends the image to the other party by switching between Front camera/Rear camera
during a videophone call.
Zoom ※ : Zooms in and sends your camera view to the other party. → p.96
Camera/Other image : You can change the view of the displays during a videophone call. → p.97
Image quality : Selects the image quality with emphasis on quality or motion. → p.97
Brightness : Adjusts the brightness of your camera view. The setting operation is the same as that
of the camera.
→ p.267 in 『 Application 』
White balance : Adjusts your camera view to natural colors according to the light source. The setting
operation is the same as that of the camera. → p.268 in 『 Application 』
Color mode set ※ : Sends your camera view in sepia (dark brown) or black and white.
The setting operation is the same as that of the camera.
→ p.268 in 『 Application 』
Photo mode ※ : Sets the shooting mode according to the situations. The setting operation is the same
as that of the camera.
→ p.267 in 『 Application 』
Chara-den : Select the character displayed in Chara-den, display a list of actions and switch the
action mode. → p.324 and p.325 in 『 Application 』
Display light : Sets the display light for the display during a videophone call. → p.100
Select image V-phone : Sets the image and its size to be displayed on the main screen. → p.100
Call time display : Switches ON/OFF of the call time display shown on the screen during a
videophone call.
Send DTMF tone ※ : Sets/cancels the Send mode of the push signal during the Chara-den. The FOMA
terminal always enters the Send mode of the push signal during a videophone call
except Chara-den.
Own number ※ : Displays your own phone number during a videophone call.
※： “Handsfree”, “Front camera/Rear camera” “Zoom”, “Color mode set,”, “Photo mode”, “Send DTMF
tone” and “Own number” go back to the default values when you finish the videophone call.
When failing to make a videophone call
When a videophone call fails, the reason for the failure is displayed. However, depending on the situation,
the reason for the failure may not appear. Depending on the type of the phone you are connected to or on
your network service subscription status, the actual state of the other party and the displayed message
may differ.
Message
Check the number and retry
Busy You have dialed a wrong phone number.
The line is busy.
Driving mode The other party’s phone is in the driving mode.
Failed to connect Reasons other than above.
Out of service area or power off The other party’s phone is out of the service area or is turned
off.
Reason
Making a Videophone Call