Foma N900i '04.2, Manual

Page: 188 / 388

186
Changing the Display and Keypad Settings
Illumination
•
Illumination in talk
2
Specify the setting for each item.
Ｓｅｔ ｃｏｌｏｒ
Ｓｅｔ ｐａｔｔｅｒｎ
Ａｄｊｕｓｔ ｃｏｌｏｒ
Ｉｌｌｕｍｉｎａｔｉｏｎ
Ｍｅｎｕ８９
Ｉｎｃｏｍｉｎｇ ｃａｌｌ
Select
Ａｄｊｕｓｔ ｃｏｌｏｒ ｔｏｎｅ
Ｃｏｌｏｒ １
Ａｄｊｕｓｔ ｃｏｌｏｒ：Ｒｅｄ
Set
Set color:
Sets the flashing color of the incoming call lamp at incoming calls or
mail.
Select the item which you want to set from “Phone”, “Video-phone”,
“Mail”, “Msg. Request” and “Msg. Free”, and then set a flashing color.
While selecting a flashing color, the incoming call lamp flashes in the
selected color.
Set pattern:
Select the flashing pattern of the incoming call lamp from “Standard”
and “Melody linkage”.
Adjust color:
Sets “Edit color name” and “Adjust color tone” for the incoming call
illumination.
In “Edit color name”, select a color you want to change and enter a
new color name.
Up to 10 full-pitch or 20 half-pitch characters can be entered.
Entering characters
→
p.298
In “Adjust color tone”, select a color you want to adjust and adjust its
color tone. As the color types of Color 1 to 12 are different, they
cannot be adjusted to the same color tone. The gradation cannot be
adjusted.
1
Select
i
“Talk” “Illumination in talk”.
You can set the flashing color of the incoming call lamp during a voice or
videophone call.
●
You can select the flashing color from seven kinds of colors and three kinds of gradations.
Default setting OFF
Setting the Incoming Call Lamp to Flash During a Call
Illumination in talk
● When a voice message recorded with the “Voice announce” function is set to the ring tone, the
incoming call lamp flashes in a fixed pattern regardless of this setting.
● When “Pattern 1”, “Pattern 2” or “Pattern 3” is set to the ring tone, the incoming call lamp flashes in
accordance with the melody regardless of this setting.
● When remote monitoring is received, the flashing color is “Gradation” and the flashing pattern is
“Standard” regardless of the settings of this function.
● When exchanging between a miniSD memory card and data, the light will flash in “Color 5”, regardless
of the settings made here.
● During charging and shooting, the color and flashing color of the incoming call lamp is red regardless
of the “Adjust color tone” setting.