154
Using Phone Functions
1
Select
i
“Dialed calls”.
<Example: Using the sent address record>
To use the received address record
Select “Received calls”.
<Common>
●
Switching the terminal off does not delete Dial records/Received calls. If you do not want other people
to see the Dialed/Received phone numbers, either delete the record or set “Received calls” and
“Redial/Dialled calls” in “Record display set” (p.206) to “OFF”.
●
When you receive a call while displaying Received calls, the record data will be updated and a
message “Updating info” will appear. You cannot switch to other record displays while this message is
showing.
●
While “PIM lock” is set, only phone numbers are recorded even for calls to/from parties whose names
are stored in the phonebook.
<Dialed calls record>
●
When you perform “Delete all”, “Redial” and “Dialled calls” will be all deleted. Note that even if you
perform “Delete this” or “Delete selected” in the dialled calls, the redial is not deleted.
Deleting the redial
→
p.73
●
When making calls by calling up a phonebook stored as secret data in the “Secret mode” or “Secret
only mode”, these calls are not recorded in the dialed record.
●
When you set “PIM lock”, “Keypad dial lock” or “Restrict dialing”, all the dialed records until then are
deleted. The dialed calls after these functions are set will be recorded in the dialed record.
<Received calls record>
●
“Missed calls” and “Unknown calls” are not displayed if there are no missed calls.
●
The number of missed calls which have not been checked in yet will decrease as you check in.
●
When the caller notifies his/her phone number, and the caller’s phone number has already stored in
the phonebook, both the phone number and name are recorded in the received call record. If the caller
does not notify the phone number, the reason for no caller ID appears.
●
When you set “PIM lock” or “Keypad dial lock”, all the received call records are deleted. After these
functions are set the received calls will be recorded in the received call record.
●
When a call comes from a party that is not in the phonebook set in “Restrict dialing” if “Restrict dialing”
is set, only the phone number is recorded.
●
When the other party uses the dial-in service, the different phone number from its dial-in number may
appear.
●
You cannot use the received call record for packet and 64K data communication for storing data in the
phonebook or composing a new mail.
Using sent/received address record
Information such as a mail address you sent, the sender’s mail address and date
and time is recorded as the sent/received address lists. You can check the
contents of the sent/received address list and use them for composing and
sending a mail and storing a phone number in the phonebook. In addition, i-mode
mail and SMS are distinguished with their icons in the sent/received address lists
so that you can see the type of a record at a glance.
●
Up to 30 records such as i-mode mail addresses and SMS phone numbers can be recorded in
the sent/received address lists respectively.
●
When the number of records exceeds the maximum number, the oldest records are
automatically overwritten.
●
The sent/received address lists cannot be displayed during a videophone call.
Using Records
Summary of Contents for N900i '04.2
