Foma N900i '04.2, Manual

Page: 207 / 388

Restricting Phone Operations
205
Prohibiting a Call by Dialing
Keypad dial lock
When this function is set, voice or videophone calls by dialing with the keypad are
prohibited. Dialing from previously stored
“Phonebook” entries before setting
keypad dial lock and from “Dialed calls” or “Redial” entries after setting keypad dial
lock is possible.
If the FOMA terminal is used for business, private use can be prevented by
previously storing necessary phone numbers in the Phonebook and by setting
this function.
● When the Keypad dial lock is on, the following operations cannot be done.
・ Dialing or voice/videophone calls using “Received calls”
・ Storing/editing ※ /deleting Phonebook entries
※:
Depending on the i-
α
ppli DX (p.66 in
『
Application
』
), the names for group 01 to 19 in
the phonebook and group 01 to 10 in the FOMA card’s phonebook can be changed.
・
Using “Phone To” or “Mail To” functions
・ Entering mail addresses using keypads
・ Creating mail using “Desktop icon”
・ Replying to mail addresses that are not stored in you phonebook
●
When “Keypad dial lock” is set existing, “Received calls”, “Dialled calls”, “Redial”, “Received
address” and “Sent address” are all deleted. However, “Received calls”, “Dialled calls” and
“Redial” for calls received/dialed and “Received address” and “Sent address” for mail
received/sent after this function is set are recorded. For unsent mail stored with address and
body entered, the address is deleted but the body is left. Unsent mail stored with the address
only is deleted.
●
Turning the FOMA terminal off does not cancel the Keypad dial lock.
1
Select
i
“Lock/Security” “Keypad dial lock”,
and then enter the security code.
The Keypad dial lock is set and “ ” appears. If the “Secret mode” or
“Secret only mode” is already set, “ ” appears. If the “PIM lock” is
already set, “ ” appears.
Security code
→ p.192
To cancel the Keypad dial lock
Perform the same procedure as described above for the Keypad dial
lock.
The Keypad dial lock is canceled and “ ” disappears.
Keypad dial lock
Ｋｅｙｐａｄ ｄｉａｌ ｌｏｃｋ
Ｌｏｃｋ／Ｓｅｃｕｒｉｔｙ
Select
Ｓｅｌｆ ｍｏｄｅ
Ｒｅｊｅｃｔ ｕｎｋｎｏｗｎ
Default setting Canceled