Manual # 26-0111000-00 / Revision D
ScreenPro PLUS – Multi-Screen Seamless Switcher 53
Learning a Preset
In the Group Functions area select Group 1 (Screen 1, 3 and Aux 1 & 2 will light on the destination bar). On the
Preview bus, select Input 8 (PVW on Screen 1 & 3 switches will change to 8). Then select the Wipe-Down Effect on
the Effect keypad and set the Rate to 1.0 sec.
Now select Group 2 (Groups 1, 3 and 4 will go dark). On the Preview bus select Input 1 (our Cam 1). At this point, all
the information that we wanted is in a Preview state.
On the Group Bar, select Groups 1&2. This will select (light) all the Groups/Destinations we want learned to the
Preset.
Note: Any information on Destinations NOT selected (unlit), will not be saved to a Preset when learned.
Press and hold Preset Learn, and press Preset 1. The information is now learned to Preset 1 and can be recalled to
Preview at any time.
Changing Preset Information
Once a Preset is recalled (always to PVW), suppose you want to switch Screen 2 & Aux 4 (the I-Mag screen & record
deck) from Input 1 (cam 1) to Input 2 (cam 2).
To do this:
Press and hold Screen 2 on the Destination Bar, and select input 2 on the Preview bus.
Now press and hold Aux 4, then select Input 2 on the Preview bus.
The new input is now in Preview and you can make the transition. If you want to save
this change to Preset
1, press and hold Preset Learn and select Preset 1. The change is now saved.
If this is a one-time change and you want keep Preset 1 as it was originally learned, simply do not re-learn it.
When Preset 1 is recalled again, it will still have Input 1 (cam 1) learned to it.
Viewing A Preset
Press a
Preset memory. The information learned to that memory location will go to Preview, and the appropriate
Destination, Group and Preview Input source buttons will light.
It is possible that Multiple Input sources will be lit on the Preview bus because each Destination is capable of having
a different input source.
You can press and hold an individual Destination switch on the Destination Bar and the Preview and Program bus will
go dark except for the inputs associated with the selected Destination.
Next Preset Key
The NEXT PRESET key will allow the user to cycle through all available presets without having to press a preset
button. For example, if Presets 1,2 and 4 have saved information and Preset 4 is currently recalled, pressing Next
Preset will recall Preset 1 into Preview. Pressing the Next Preset key again will recall Preset 2 and so forth. The user
still has to initiate a transition for this look to go to program.
To Clear A Preset
Simply relearn the Preset to overwrite a previous save or perform a RESET ALL in the SYSTEM menu to erase all
user presets.
PIP Presets
To save PIP size and position parameters for quick recall, size and position an image in Screen 1 Preview. Hold the
Learn key down and then press the PIP A, PIP B, PIP C or PIP D key. The size and position of the PIP will be stored
in Flash on the controller. After a PIP preset has been saved, pressing the PIP [A-D] button(s) will apply the preset to
the screens currently active in the destination bus. If a PIP is currently in Program, pressing a PIP preset button will
have no effect.
