manualshive.com logo in svg

FOLSOM ScreenPro PLUS 1200 SERIES, Installation And Operator'S Manual

Share
Download
FOLSOM ScreenPro PLUS 1200 SERIES Installation And Operator'S Manual Download Page 31

 

Manual # 26-0111000-00 / Revision D 

ScreenPro PLUS – Multi-Screen Seamless Switcher    21 

 

 
 
 
 

 

 
 
 
 
 
 
The second line of the menu displays the version of software that is currently being executed. The software version 
number will change as software upgrades are released. The most current software version is available for download 
from the Folsom Research web site at 

www.folsom.com

. 

 
When initialization is complete, the Main Menu will be displayed. 
 
 
 
 
 
 
 
 
 

 
 
 
 

Main Menu Field Descriptions 

 
IN: - Refers to the maximum number of inputs the ScreenPro Plus system can have. For 1600 series, the number will 
be 16. For 1200 series, the number will be 12. 
 
SCN: - Refers to the number of Output Screens the controller detected during power-up. This number can range from 
between 1 and 6. 
 
AUX: - Refers to the number of Auxiliary Outputs available in the system. This number is dependant on the number of 
output screens connected. See the AUX OUTPUTS table in Chapter 2 of this manual to understand how Output 
Screens and AUX availability relate to one another. 
 
BP: - Refers to the number of BlendPro units detected during power-up. 
 
EFF: - This is the currently selected Transition Effect that will be used if AUTO TRANS or the T-BAR is engaged. 
 
PG: - This field refers to the Preset Page Number currently selected. On the ScreenPro Plus Controller, there are 4 
pages of 16 presets, for a total of 64 presets. Use the PAGE PRESET key to change which page of presets is 
currently in use. 
 
RATE: Numbers in this field range from 0.0 to 5.0 seconds. This is the amount of time a transition will take to 
complete for any of the single screen transitions. After selecting a Single-Screen transition effect, hold down the 
WIPE key and twist the Joystick to change this value. 
 
M_RATE: As with the RATE field, numbers will range from 0.0 to 5.0 seconds. This is the amount of time a transition 
will take to complete across multiple screens, provided a Multi-Screen transition has been selected for use. After 
selecting a Multi-Screen transition effect, hold down the WIPE key and twist the Joystick to change this value. 

 

SCREENPRO PLUS CONTROLLER 

VERSION X.XX 

FOLSOM RESEARCH, INC. 

 
INITIALIZING… 

 IN:16 SCN:5 AUX: 2   BP: 0 
 EFF: MIX             PG: 1 
 RATE:1.0       M_RATE: 1.0 
 

Summary of Contents for ScreenPro PLUS 1200 SERIES































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands