50
Manual # 26-0111000-00 / Revision D
ScreenPro PLUS – Multi-Screen Seamless Switcher
SYSTEM
Æ
CONFIG SERIAL
Allows the user to change ECHO from ON/OFF. BAUD RATE can be adjusted from 1200, 2400, 4800,
9600, 19.2K, 38.4K or 57.6K. DATA BIT has the option of 7 or 8. STOP BIT can be changed between 0
and 1. PARITY supports NONE, EVEN or ODD. RESET CONFIG will default the settings to Baud = 57.6,
Parity = None, Data Bits = 8, Parity = None and Echo = On.
SYSTEM
Æ
RESET SPRO
This menu item is used to reset the ScreenPro Plus and any attached ScreenPROs. Press the +/ON key to initiate
the reset sequence. The Graphic Cards will be reset to their factory defaults.
SYSTEM
Æ
RESET ALL
This menu item is used to reset the ScreenPro Plus and any attached ScreenPROs and the controller. Press the
+/ON key to initiate the reset sequence. The entire system will be reset to the factory defaults.
SYSTEM
Æ
DEFINE BLK KEYS
This menu item allows a user to define the color used when either the “BLACK PROGRAM” or “BLACK PREVIEW”
keys are pressed. Currently the choices are BLK (default) or WHT (White). If WHT is chosen, whenever one of the
two keys mentioned above are pressed, the screen will go White.
SYSTEM
Æ
TALLY CFG
Tally outputs are available on the first 8 inputs. Tally activation is user-definable. Tallys can be activated based on the
output of Screen 1-6 or Aux 1-10.
As this menu is scrolled, using the “up/down” arrow keys, the available outputs will be displayed. Turn on the desired
output(s) using the “+/On” key and turn them off using “-/Off.”
<- CONSOLE PORT MENU
BAUD RATE 57600
DATA BIT 8
STOP BIT 1
PARITY NONE
ECHO ON
RESET CONFIG [+]
