Operating Manual RTM X42.CC Control Center, RTM Monitoring & Control Software
19.03.2019
47
Detail view channel
Pos. Description
13
Digital inputs on the brake actuator
Up to 4 digital ports can be connected via the connector on the brake
actuator. The dot indicates the current state of the corresponding relay
output.
Active
Inactive
The relay inputs are configured directly in the RTM X42.BC.T/R transceiver
via the integrated web interface.
Refer to the Operating Manual RTM X42.BC Brake Control
14
Controls for manual operation of the brake actuator
Extraction of the brake actuator
retraction of the brake actuator.
The manual operation of the brake actuators is not performed
continuously, however, gradually. A click triggers the operation pursuant
to the number of entered rotations.
When entering 360, the spindle performs 1 rotation or a stroke of 2mm
14
Reference braking force
The brake actuator continues until the reference braking force is reached.
Brake release
The brake actuator extracts completely.
16
Master brake actuators
All activated brake actuators can be controlled simultaneously by way of
this checkbox.
-
Manual retracting and extending
-
Extend the brake actuator completely
-
Approaching the reference braking force
Table 15: detail view channel
