Operating Manual RTM X42.CC Control Center, RTM Monitoring & Control Software
19.03.2019
57
Dialogue window Details Data Recording
Pos. Description
5
Customer Name
Name of your customer for the final product
Table 18: Dialogue window Details Data recording
Press the “Recording” control again to stop the data recording.
The data is automatically saved in the background.
Additionally, an initial quality log is automatically generated and displayed immediately.
You set the configurations for the quality log that is displayed here, in the recipe
manager. Refer to p. 48ff.
10.1
"Manual" Mode
Figure 43: Manual control, locked, accessible, enabled
ATTENTION WIRE-BREAK
Manual braking has immediate effects on the strand tension and can
lead to wire breaks!
This function should only be enabled for experienced system
operators.
Manual control can be enabled when recording, if this is approved in the recipe.
This allows the operator to perform the following interventions in the single-view
channel:
-
Disabling of the automatic control
-
Manual operation of a brake actuator
-
Manual operation of all (active) brake actuators via the control “Master brake
actuators”
-
Adjust the reference value of the strand tension. The thresholds cannot be changed.
