Operating Manual RTM X42.CC Control Center, RTM Monitoring & Control Software
19.03.2019
41
7.1.11
Status indication of the brake actuation
The charge level of the battery in the brake actuator is displayed here. When the battery
is draining, the color of the indicator changes.
Green: 11 — 100%
Orange: 6 — 10%
Red: less than 6%
In the event of failure, additional symbols are displayed, e.g., if the maximum braking
force is exceeded or if the radio connection is lost.
Refer to System status, alarm messages, relay outputs p. 59ff.
7.1.12
Histogram
The histogram displays the strand tension of the selected channels. The tension values
are displayed either over time or over the length of the produced product.
To activate the running meters/ production length, refer to p.26
Figure 32: Histogram
Quick access to controls
Pos. Name,
Description
1 y-axis
This axis is scaled by means of the bar display. The maximum value of an
active channel is also the maximum value of the y-axis.
2 Zoom
x-axis with unit
“+” Reduce the detail
“-” Enlarge the detail
We recommend the use of a proximity switch on the capstan to record the
running meters.
3 Legend
Only the selected channels are displayed. Refer to Histogram p. 41ff.
The sequence of the channels in the legend is determined by the
sequence in which the channels are assigned to each group. The
sequence cannot be changed here.
Table 14: Histogram
1
2
3
