REPLACING SUPER-STRUTS
5G Paint Mixer Instruction Manual
47
2. Locate the hole in the strut pin. Insert the end of the 1/8" hex key into the
hole to prevent the pin from rotating while loosening the bolt. If no hole
is observed, grasp the pin with vice grips and loosen the nut.
Figure 18 Keeping the Strut Pin from Rotating
3. Beginning on the right side, use a box end or adjustable wrench to
remove the top nuts, washers, and rubber grommets on both struts.
Remove the hex wrench from the hole in the strut pin.
HEX
WRENCH
