REVERSING DOOR
5G Paint Mixer Instruction Manual
45
Figure 15 Reversing Door
4. Using a slotted screw driver, remove the four (4) screws that mount the
door to the mixer. Save for later use.
5. Reach behind the door post and remove the two (2) magnets by pressing
the tabs.
6. Insert these magnets in the slots on the opposite door post.
7. Position the door with the stud at the top and mount on the door post
using the screws that were removed earlier.
8. Close the door.
9. It may be necessary to adjust the safety switch at the top of the door near
the stud. You should hear a clicking sound as the door is opened and
closed. Side-to-side adjustments are done with a slotted screw driver as
shown.
Figure 16 Safety Switch Adjustment
PRESS
TABS
MAGNET
STUD
MOVE
MOVE
M O VE
