TROUBLE-SHOOTING CHART
24
Fluid Management
®
TROUBLE-
SHOOTING
CHART
Using the chart below, locate the problem in the first column, then select the
probable cause to check and action to take from the next two columns. The
problems are arranged from the simplest to the most complex.
Where appropriate, refer to the Servicing and Repair section to correct the
problem.
PROBLEM
CHECK
ACTION
The paint mixer does not
start.
if mixer attached to receptacle.
receptacle for voltage.
• Connect to power source.
• Contact electrician.
if the front door is not closed.
• Close the front door.
if the POWER switch is in the ON
position and operating properly.
The EMERGENCY STOP button
should not be depressed.
6.3 AMP fuse.
5 amp Slo-Blo fuse.
PCB connector.
• Turn on POWER switch.
Put the EMERGENCY
STOP button in the ON
position.
• Replace fuse.
• Replace fuse.
• Reestablish PCB
connector.
May be problem with printed circuit
board.
• Call Customer Service.
• Replace printed circuit
board.
