REMOVING SHAKE FRAME
34
Fluid Management
®
4. Position one person at the back of the mixer to hold the shake frame.
Using a 1/2" socket or open-end wrench, remove the two (2) nuts and
screws holding the swivel rods to the inner frame.
Figure 10 Nuts and Screws Holding Swivel Rods
5. Repeat steps 2 - 4 on the other side.
6. With the assistance of another person, lift up and pull out the complete
shake frame.
Be careful when removing the shake frame.
It may swivel or fall forward while working
on the next step.
CAUTION:
Be careful when lifting.
The shake frame weighs over 200 pounds.
CAUTION:
HEX
SWIVEL
FLAT HEAD
SHAKE
CAP SCREW
ROD
NUT
FRAME
