27
Provincial Road n.78 Km 12.150
33050 Mortegliano (UD) – Italy
Tel. +39.(0)432.992482 – +39.(0)432.993557
Fax +39.(0)432.931280
Sito web:
www.flysynthesis.com
e-mail:
Maintenance Manual
FLY SYNTHESIS TEXAN
TOP CLASS 580 ISR
(For Rotax 912 ULS
versions)
Identification: MM_TC_580_Rev.2
Page: 27 of 77
Date: 15/02/11
Issued: C. Cosatto
Verified: C. Cosatto
Approved: C. Cosatto
Revision Description:
Placard update
7.1
RECOMMENDED FASTENER TORQUE VALUES
*The following table presents the required torque values of the different assemblies in the
airplane. It is assumed that the bolts and nylon locknuts are in new condition and are
made from standard finish 8.8 coarse metric hardware. Final tightening sequence is
achieved smoothly and slowly until full torque has been obtained.
7.2 FUSELAGE
Quantity
TORQUE
MAIN LANDING GEAR STRUCTURE ON FUSELAGE
N°24
screws M6
Kg*mt 0,75
MAIN LANDING GEAR LEG ATTACH ON GEAR STRUT
N°2 screws
M8
Kg*mt 1,6
WHEEL AXLE ATTACH ON MAIN LANDING GEAR LEG
N°2 screws
M6
Kg*mt 0,75
PLATE ATTACHMENT TO FIREWALL
N°7 screws
M8
Kg*mt 1,6
PLATE ATTACHMENT TO SHOCK ABSORBER SYSTEM
N°2 screws
M8
Kg*mt 2,4
FLAP CONTROL SHAFT ATTACHMENT TO FUSELAGE
N°1 screw
M6
Kg*mt 0,75
AILERON CONTROL STICK UNDER SEATS FLOOR IN
FUSELAGE
N°16
screws M5
Kg*mt 0,42
FLAP ACTUATOR HINGES
N°2 screws
¼‖
Kg*mt 0,9
FLAP CONTROL STICKS (INSIDE FUSELAGE)
N°8 screws
M6
Kg*mt 0,75
CLOCHE SYSTEM
N°8 screws
M6
Kg*mt 0,75
BOWDEN CABLE ATTACHMENT
N°6 screws
M5
Kg*mt 0,42
ENGINE MOUNT ATTACHMENT AT FIREWALL
N°4 screws
M8
Kg*mt 2,4
PINCER DISCK BRAKE ATTACHMENT INTO WHEEL AXLE
N°4 screws
M6
Kg*mt 0,75
PINCER TO PINCER SUPPORT GROUP
N°8 screws
M6
Kg*mt 0,75
FAIRING TO WHEEL AXEL
N°6 screws
M6
Kg*mt 0,75
PULLEY TO PULLEY SUPPORT
N°1 screw
M8
Kg*mt 1,6
SUPPORT ROD TO PULLEY
N°1 screw
M6
Kg*mt 0,42