Fly Synthesis Texan top class 580 ISR, Maintenance Manual, Page: 12 / 77

12
Provincial Road n.78 Km 12.150
33050 Mortegliano (UD) – Italy
Tel. +39.(0)432.992482 – +39.(0)432.993557
Fax +39.(0)432.931280
Sito web:
www.flysynthesis.com
e-mail: info@flysynthesis.com
Maintenance Manual
FLY SYNTHESIS TEXAN
TOP CLASS 580 ISR
(For Rotax 912 ULS
versions)
Identification: MM_TC_580_Rev.2
Page: 12 of 77
Date: 15/02/11
Issued: C. Cosatto
Verified: C. Cosatto
Approved: C. Cosatto
Revision Description:
Placard update
2.1 TOOLING
Tooling required to do maintenance on this aircraft is listed below. Please note that the list
may not be comprehensive

Loctite (243, 567 and Antisieze Lubricant # 76764) for the frame section.

Open ended Metric Spanner set

Torque wrench

Air Pump

Various petroleum lubricants

Dry Lubricant
– lubricant that doesn‘t attract dust after application.

UV Resistant Tie wraps, and tooling

Metric Hex key set

Gasoline resistant thread sealant tape

Various general care items

Metric Socket Wrench Set

Pliers and Wise Grips

Phillips and Regular Screw Driver Set

Flexible neck funnel
2.2 OTHER POSSIBLE REQUIRED ITEMS

Safety wire and Safety Pins

WD-40, CRC or another water displacement compound

Telescopic mirror

Good flash light

5x and 10x magnifying glass and or video inspection equipment
2.3 SOURCES TO PURCHASE PARTS
Parts can be purchased from the following sources
Component Source
Composite airframe parts

Flysynthesis Srl or local distributor.
Non Composites hardware eg
Bolts screws etc.

Flysynthesis Srl or local distributor.

Other aircraft specialty hardware shops.
Avionics and Instruments

Flysynthesis Srl or local distributor.

Other aircraft avionic and instrument
specialty shops.
Propeller Parts

Flysynthesis Srl or local distributor.

Propeller manufacturer eg. DUC France, GT
Tonini (Italy) or Pipistrel (Slovenia).