Fluke 19xC, User Manual

Page: 96 / 159

Fluke 19xC-2x5C
Users Manual
86
Recalling Screens with Associated Setups
To recall a setup, do the following:
1 Display the
SAVE
/
PRINT
key labels.
2 Open the Recall menu.
3 Highlight a setup.
4 Recall the saved setup.
Observe that the recalled waveform is displayed and that
HOLD
appears on the screen. From this point you can use
cursors and zoom for analysis or you can print the recalled
screen.
To recall a screen as a reference waveform to compare it
with an actually measured waveform, continue from step 3
as follows:
4 Use
RECALL FOR REFERENCE
to
recall the saved screen.
5 Resume the measurement. Both,
the reference screen and the
measurement screen will be
displayed.
Recalling a Setup Configuration
To recall a setup configuration, do the following:
1 Display the
SAVE
/
PRINT
key labels.
2 Open the Recall menu.
3 Highlight a setup.
4 Recall the saved setup.
Observe that
RUN
appears at the top right of the screen.
From this point you continue in the new operating
configuration.