Fluke 19xC, User Manual

Page: 131 / 159

Specifications
DMM Measurements on Meter Inputs
10
121
Diode
Maximum Voltage Reading...................................... 2.8 V
Open Circuit Voltage................................................. <4 V
Accuracy ...............................................
±
(2 % +5 counts)
Measurement Current ............................... 0.5 mA,
±
20 %
Temperature (TEMP)
With Optional Temperature Probe
Ranges (
°
C or
°
F) ..................................-40.0 to +100.0
°
-100.0 to +250.0
°
-100.0 to +500.0
°
-100 to +1000
°
-100 to + 2500
°
Probe Sensitivity ............................ 1 mV/
°
C and 1 mV/
°
F
DC Voltage (VDC)
Ranges ..... 500.0 mV, 5.000 V, 50.00 V, 500.0 V, 1100 V
Full Scale Reading........................................ 5000 counts
Accuracy ............................................
±
(0.5 % +5 counts)
Normal Mode AC Rejection at 50 or 60 Hz
±
1 % .... >60 dB
AC Voltage (VAC)
Ranges......500.0 mV, 5.000 V, 50.00 V, 500.0 V, 1100 V
Full Scale Reading ........................................5000 counts
Accuracy
15 Hz to 60 Hz..................................
±
(1 % +10 counts)
60 Hz to 1 kHz...............................
±
(2.5 % +15 counts)
For higher frequencies the frequency roll off of the
Meter input starts affecting accuracy.
Normal Mode DC Rejection...................................>50 dB
AC+DC Voltage (True RMS)
Ranges......500.0 mV, 5.000 V, 50.00 V, 500.0 V, 1100 V
Full Scale Reading ........................................5000 counts
Accuracy
DC to 60 Hz......................................
±
(1 % +10 counts)
60 Hz to 1 kHz...............................
±
(2.5 % +15 counts)
For higher frequencies the frequency roll off of the Meter
input starts affecting accuracy.
All accuracies are valid if the waveform amplitude is
larger than 5 % of full scale.