Fluke Biomedical ProSim 8 Series, User Manual

Page: 94 / 112

ProSim 8
Users Manual
82
Charge the Battery
The battery charge level shows in the upper right corner of the display.
ß
Shows when the ac/dc power supply is
connected

Shows the battery level when the Product
operates on the battery
You can charge the battery while it is in or out of the Product. The charge rate is
slower when the Product is energized and the battery charger is on. To charge
the battery:
1. Connect the ac/dc power supply to the power connector on the battery pack.
See Figure 60.
2. Connect the ac/dc power supply to a power source.
Note
When the battery pack is installed in the Product, ensure the battery
charger is enabled. See
Set Battery Settings to enable and disable
the battery charger.
The battery charge LED on the battery pack shows red or green when the battery
charges. When the LED is green, the battery is charged.
When you have two or more battery packs, you can charge one battery externally
while you use the other to energize the Product.
Battery Charge
Indicator
Battery LED
glh047.eps
Figure 60. External Battery Charging Connections
When the battery pack is removed from the Product, push the button below the
charge level indicators to see the battery charge level. See Figure 60.