Fluke Biomedical ProSim 8 Series, User Manual

Page: 3 / 112

Notices
All Rights Reserved

Copyright 2016, Fluke Biomedical. No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language without the written permission of Fluke Biomedical.
Copyright Release
Fluke Biomedical agrees to a limited copyright release that allows you to reproduce manuals and other printed
materials for use in service training programs and other technical publications. If you would like other
reproductions or distributions, submit a written request to Fluke Biomedical.
Unpacking and Inspection
Follow standard receiving practices upon receipt of the instrument. Check the shipping carton for damage. If
damage is found, stop unpacking the instrument. Notify the carrier and ask for an agent to be present while the
instrument is unpacked. There are no special unpacking instructions, but be careful not to damage the instrument
when unpacking it. Inspect the instrument for physical damage such as bent or broken parts, dents, or scratches.
Technical Support
Claims
Our routine method of shipment is via common carrier, FOB origin. Upon delivery, if physical damage is found,
retain all packing materials in their original condition and contact the carrier immediately to file a claim. If the
instrument is delivered in good physical condition but does not operate within specifications, or if there are any
other problems not caused by shipping damage, please contact Fluke Biomedical or your local sales
representative.
Returns and Repairs
Return Procedure
All items being returned (including all warranty-claim shipments) must be sent freight-prepaid to our factory
location. When you return an instrument to Fluke Biomedical, we recommend using United Parcel Service,
Federal Express, or Air Parcel Post. We also recommend that you insure your shipment for its actual replacement
cost. Fluke Biomedical will not be responsible for lost shipments or instruments that are received in damaged
condition due to improper packaging or handling.
Use the original carton and packaging material for shipment. If they are not available, we recommend the
following guide for repackaging:
 Use a double–walled carton of sufficient strength for the weight being shipped.
 Use heavy paper or cardboard to protect all instrument surfaces. Use nonabrasive material around all
projecting parts.
 Use at least four inches of tightly packed, industry-approved, shock-absorbent material around the
instrument.
Returns for partial refund/credit:
Every product returned for refund/credit must be accompanied by a Return Material Authorization (RMA) number,
obtained from our Order Entry Group
Repair and calibration:
To ensure the accuracy of the Product is maintained at a high level, Fluke Biomedical recommends the product
be calibrated at least once every 12 months. Calibration must be done by qualified personnel. Contact your local
Fluke Biomedical representative for calibration.