20 |
www.flowair.com
1.22.
Lifting NWL module(Cube 40 NWL)
All Cube units are equipped with handles for ropes, localized in upper part, allowing to lift the unit. Spreader beam application is
not necessary. Handles for lifting the unit and heat module are indicated in pictures below.
The NWL supply module is delivered to the place of delivery upside down. To position the device, carefully rotate
the supply air module so as not to damage the casing. Use the polystyrene cover to protect the NWS supply
module while turning
.
The process of rotating the module is described in section 5.20.
•
The polystyrene cover should not be removed before turning over NWL supply module. Storing the air supply module
without a polystyrene cover may damage the actuator.
•
Because of load distribution, minimum length of hoisting ropes from handle to hook is 3,5 m. Disobeying this
Before placing the device on the NWL supply air module, unscrew the transport lugs.
