FLIR E70290, Installation & Operation Instructions

Page: 62 / 136

8.3 Fishinder applications' features
Using waypoints to mark
ishing spots or target
locations ( Pro only)
• Placing a waypoint
Determining target depths. • Enabling / Disabling
Target Depth ID
• Enabling / Disabling Depth
Lines
Adjusting the speed of the
scrolling image.
• 8.7 Scrolling
Setting alarms (ish, depth or
water temperature).
• 11.2 Alarms
Using Zoom. • 8.5 Zoom
* Using A-Scope mode. • 8.8 A-Scope mode
Changing the on-screen
depth range.
• 8.6 Range
Adjusting Sensitivity Settings
to help optimize and simplify
the displayed image.
• 8.11 Sensitivity
adjustments
Note:
* Not available in DownVision application.
8.4 Fishinder applications’ controls
The Sonar applications consists of 2 modes:
Scrolling mode and Cursor / Pause mode . The
behavior of some controls are dependent upon mode
and product variant.
Scrolling mode
Sonar application DownVision
™
application
Scrolling mode is the default mode. In Scrolling
mode
an image is displayed which scrolls from right
to left across the screen.
In
Scrolling mode the controls behave as follows:
• from the default view, pressing the + button
enables Zoom mode.
– when in Zoom mode use
+ and – buttons to
increase or decrease the zoom level.
• pressing the OK button opens the application
menu.
• pressing the Back button opens the View
switcher (not applicable to DV variants).
• using any of the Directional controls will switch
to Cursor / Pause mode .
Cursor / Pause mode
Important: The DV and DVS variants do not
display a cursor in Cursor / Pause mode .
Sonar application DownVision
™
application
In
Cursor / Pause mode
the scrolling image is
paused and depending on product variant, the cursor
can be moved around the screen.
In
Cursor / Pause mode the controls behave as
follows:
• from the default view, pressing the
+ button
enables Zoom mode.
– when in Zoom mode use
+ and – buttons to
increase or decrease the zoom factor.
• using any of the Directional controls will move
the cursor in that direction (not applicable to DV
and
DVS
variants).
• pressing the
Ok
button opens the context menu.
• pressing the
Back
button returns the application
to Scrolling mode .
Menus and dialogs
With a menu or dialog open the controls behave as
follows:
62
Dragonly–4 / Dragonly–5 / Dragonly–7 / Wi–Fish