FLIR E70290 Installation & Operation Instructions Download Page 101

Page: 101 / 136

Maintenance menu

This menu provides access to systems settings reset and diagnostics.

Menu item

Description

Options

About This Unit

Displays a list of details about your unit.

• Device
• Serial No.
• Software

Settings Reset

This option resets your menu options to factory

default. It will NOT affect your waypoints or tracks.

• Yes
• No

Settings and Data Reset

In addition to the settings reset detailed above,

performing a settings and data reset will also

remove ALL waypoint and track data.

• Yes
• No

Back-up Settings

Back-up settings to a memory card.

Restore Settings

Restore saved settings from a memory card.

Save Logs

Allows you to save error logs to SD card for

troubleshooting purposes.

Erase Logs

Selecting this option will erase any crash logs on

the device.

Tools & Settings

101

Summary of Contents for E70290









































































































































Search results

Summary of Contents for E70290

Reviews:

Related manuals for E70290

Brands by name

Popular brands

FLIR E70290, Installation & Operation Instructions

Search results

Summary of Contents for E70290

Reviews:

Related manuals for E70290

Brands by name

Popular brands