4. Configure the following to customize settings for video loss events:
•
Period
: Click
Set
to configure a schedule for video loss events. It is recommended
to leave this on the default setting, so you can be alerted at any time one of your
cameras loses video.
•
Show Message
: Check to show a popup message on the monitor if one of your
cameras loses video.
•
Send Email
: Check to enable email alerts. Enabling
Send Email
requires you to
set up email notifications. See 13.3.5
instructions.
•
Channels
: Check to enable video recording when video loss occurs.
•
PTZ Activation
: Check to enable PTZ actions when video loss occurs (PTZ camera
required; not included). Click
Set
to select which PTZ actions will be taken by each
camera.
•
Post_REC
: Enter the number of seconds the system will record after video loss
occurs.
•
Sequence
: Check to enable a custom sequence mode when video loss occurs on
the selected channel. Then click the channels you would like to display in the cus-
tom sequence mode.
•
Snapshot
: Check to save a snapshot when video loss occurs.
•
Buzzer
: Check to enable the system buzzer when video loss occurs on the cur-
rently selected channel.
5. Click
OK
to save changes.
13.3.10
Configuring Tampering Settings
Allows you to set up your camera to detect video tamper, and trigger alerts.
To configure video tamper settings:
1. From the
Main Menu
, click
and then click
Event > Motion > Tampering
.
#LX400094; r.43927/43955; en-US
77
Summary of Contents for DNR214
