FLIR DNR214, Instruction Manual

Page: 32 / 220

Using the NVR On-Screen Display 7
1. Main Menu: Opens the Main Menu for browsing. For details on Main Menu func-
tions, see 13 Using the Main Menu , page 50
2. Collapse
3. Viewing Options: Select how many channels are shown on screen during Live
View.
4. Sequence Control : Click to start / stop sequence mode. In Sequence Mode, the
NVR automatically switches between channels every few seconds.
5. PTZ : Click to open PTZ controls.
6. Camera Setting : Click to open camera image settings.
7. Playback : Opens the Playback Menu. This allows you to search for video record-
ings saved on the NVR’s hard drive. For details on using the Playback menu, see
15.4
Playback , page 110.
8. Event : View alarms in progress. See 13.2.4 Event , page 61.
9. Channel Info : Click to access status information about connected cameras.
10. Remote Device : Manage network cameras over the network.
11. Network : Configure network settings for your system. See 13.3.1 Network , page 67.
12. HDD Manager : Manage hard drives connected to the system. See 13.3.18 Format-
ting the Hard Drive , page 85.
13. USB Manager : Click to access options for connected USB flash drives (not in-
cluded). You can backup video, logs, or system configurations and install firmware
upgrades.
14. Upgrade : Check for firmware upgrades. The system must be connected to the In-
ternet to check for or receive updates.
7.4 Using the Camera Tool bar
The Camera Tool bar lets you perform quick functions for a specific channel on the NVR.
• Hover the mouse near the top of a channel with a connected camera.
• The Camera Tool bar opens at the top of the camera’s live display:
1. Instant Playback
#LX400094; r.43927/43955; en-US
22