FLIR 72501-0101, User Manual

Page: 85 / 146

Working with measurement tools 18
18.1 General
To measure a temperature, you can use one or more measurement tools, e.g., a spot-
meter or a box.
18.2 Adding/removing measurement tools
Follow this procedure:
1. Push the joystick to display the menu system.
2. Select ( Measurement ) and push the joystick. This displays a submenu.
3. Use the joystick to select one of the following:
• Select ( No measurements ) to remove all tools.
• Select ( Center spot ) to add a center spot.
• Select ( Hot spot ) to add a hot spot detection within a box area.
• Select ( Cold spot ) to add a cold spot detection within a box area.
• Select ( User preset 1 ) to add user preset 1. (Not available in all camera
models.)
• Select ( User preset 2 ) to add user preset 2. (Not available in all camera
models.)
4. Push the joystick to confirm and exit the menu mode.
18.3 Editing user presets
18.3.1 General
A user preset is a measurement tool, or a group of measurement tools, with predefined
characteristics.
18.3.2 Procedure
Follow this procedure:
1. Push the joystick to display the menu system.
2. Select ( Measurement ) and push the joystick. This displays a submenu.
3. Use the joystick to select ( User preset 1 ) or ( User preset 2 ).
#T559954; r. AT/65353/65353; en-US 71