FLIR 72501-0101 Page 36 User Manual Download

Page: 36 / 146

Camera parts

10.4

View from the rear

10.4.1

Figure

10.4.2

Explanation

1. Sensor that adjusts the touch-screen LCD intensity automatically.

button.

Function:

• Push to switch between touch-screen LCD mode and viewfinder mode.

Note

This item is dependent on the camera model.

3. Viewfinder.

Note

This item is dependent on the camera model.

4. Programmable button

5. Joystick with push-button functionality.

Function:

• Move the joystick left/right or up/down to navigate in menus, submenus, and dia-

log boxes, and to change values in dialog boxes.

• Push the joystick to confirm changes and settings in menus and dialog boxes.

6. Back button

Function:

• Push to leave dialog boxes and to go back into the menu system.

7. Camera lamp button

Function:

• Push to turn on or off the camera lamp.

Note

The camera lamp must be enabled. Select

(

Settings

) >

Device set-

tings

Lamp & laser

Enable lamp & laser

#T559954; r. AT/65353/65353; en-US

Summary of Contents for 72501-0101



















































































































































Search results

Summary of Contents for 72501-0101

Reviews:

Related manuals for 72501-0101

Brands by name

Popular brands

FLIR 72501-0101, User Manual

Search results

Summary of Contents for 72501-0101

Reviews:

Related manuals for 72501-0101

Brands by name

Popular brands