FLIR 72501-0101, User Manual

Page: 75 / 146

Achieving a good image 16
In manual mode, you can adjust the image by touching the screen or by using the joy-
stick. For more information, see sections 16.3.4
Manual adjustment by touching the
screen , page 62 and 16.3.5 Manual adjustment by using the joystick , page 63.
• In live mode, push the button to switch between automatic and manual image ad-
justment modes.
• In preview/edit mode, manual image adjustment mode is active.
Note You can also assign image adjustment functions to one of the programmable but-
tons. For more information, see section 13.11 Assigning functions to the programmable
buttons , page 36.
• Switch between auto and manual : Allows you to switch between automatic and man-
ual image adjustment modes.
• Auto adjust the manual temperature scale : Allows you to perform an automatic adjust-
ment of the image while remaining in manual image adjustment mode.
16.3.2 Example 1
Here are two infrared images of a building. In the left image, which is auto-adjusted, the
large temperature span between the clear sky and the heated building makes a correct
analysis difficult. You can analyze the building in more detail if you change the tempera-
ture scale to values close to the temperature of the building.
Automatic Manual
16.3.3 Example 2
Here are two infrared images of an isolator in a power line. To make it easier to analyze
the temperature variations in the isolator, the temperature scale in the right image has
been changed to values close to the temperature of the isolator.
Automatic Manual
#T559954; r. AT/65353/65353; en-US 61