FLIR 72501-0101, User Manual

Page: 77 / 146

Achieving a good image 16
16.3.4.4 Locking the touch screen
When you have adjusted the image to levels that allow you to study your area of interest,
you can lock the touch screen to prevent further unintentional adjustments.
To lock the screen, touch the icon to the left of the temperature scale.
To unlock the screen, touch the icon to the left of the temperature scale.
Note If you switch to automatic image adjustment mode, the screen automatically un-
locks and your manual adjustments are lost.
16.3.5 Manual adjustment by using the joystick
16.3.5.1 Manual adjustment modes
There are two different settings for the manual adjustment mode (applicable for the joy-
stick only):
• Level, Span : With this setting, you can manually adjust the level and span by using
the joystick.
• Level, Max, Min : With this setting, you can manually adjust the level by using the joy-
stick. You can also change the upper and lower temperatures individually.
Select the type of manual image adjustment mode under ( Settings ) > Device set-
tings > User interface options > Manual adjustment mode .
16.3.5.2 Manual adjustment in Level, Span mode
Note This procedure assumes that you have configured the camera for manual image
adjustments in Level, Span mode. Select Settings > Device settings > User interface op-
tions > Manual adjustment mode = Level, Span .
Follow this procedure:
1. In live mode, push the button to enter manual adjustment mode.
2. Move the joystick up/down to increase/decrease the level.
3. Move the joystick left/right to increase/decrease the span.
4. (Optional step.) In preview/edit mode, push the button to perform a one-shot auto-
adjust sequence.
16.3.6 Manual adjustment in Level, Max, Min mode
Note This procedure assumes that you have configured the camera for manual image
adjustments in Level, Max, Min mode. Select Settings > Device settings > User interface
options > Manual adjustment mode = Level, Max, Min .
Follow this procedure:
1. In live mode, push the button to enter manual adjustment mode.
2. To simultaneously change the temperature scale minimum and maximum limits,
move the joystick up/down.
3. To change the minimum limit or the maximum limit, do the following:
• Move the joystick left/right to select (highlight) the maximum or minimum
temperature.
• Move the joystick up/down to change the value of the highlighted temperature.
4. (Optional step.) In preview/edit mode, push the button to perform a one-shot auto-
adjust sequence.
#T559954; r. AT/65353/65353; en-US 63