22.3 Multi-fill calibration with a balance connected
1.
Set the pump units to
weight.
Refer to "Units" on page 105.
2.
Place all containers that will be used for the calibration fills onto the balance.
i
It is acceptable to use a single container large enough to
contain the total volume from all calibration fills.
3.
Tare the balance.
4.
Select
Multi-fill calibration.
5.
Enter the number of calibration fills.
6.
Start the calibration fills depending on the selected filling method:
Time delay between fills
- Press
or use the external input to start the
first calibration fill. Any further fills will start automatically after the
Between fill
delay
has elapsed.
Keypad to start each fill
- Press
to start each fill.
External input start each fill
- Press
or use the external input to start
each fill.
PF7/PF7+ Peristaltic Filler with QC14 Pumphead User Manual
75
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
