15
PF7/PF7+ Peristaltic Filler with QC14 Pumphead User Manual
6 When you unpack your pump
Lift the pump according to standard Health and Safety guidelines
using both lifting points. (Refer to "Lifting point locations" on
page 17)
DO NOT lift the pump by holding the pumphead as the access tray
can disengage.
1.
Unpack all parts carefully, retaining the packaging.
2.
Make sure you have all components in "Supplied components" below:
Table 1 - Supplied components
PF7/PF7+ pump drive unit, fitted with a QC14 pumphead.
QC14 pumphead tube lock set
Power supply cable for country of use
Safety information booklet
3.
Inspect components for damage. If anything is missing or damaged, contact
your Watson-Marlow sales office or distributor.
4.
Dispose of the packaging at an appropriate recycling centre. The outer carton
is made of corrugated cardboard.
6.1 Before storage
Pump:
1.
Make sure you have all components in "Supplied components" above.
2.
Refer to "Pump specifications" on page 159 for storage specifications.
Tubing:
1.
Make sure use-by-dates are clearly marked.
