FLENDER K.A Series, Operating Instructions Manual

Page: 20 / 128

● Pay attention to the notices attached to the gear unit such as the rating plate, direction arrow
symbol etc. Notices must not be concealed by paint or dirt. Replace missing plates.
● Bolts which have been damaged during assembly or disassembly work must be replaced
with new ones of the same strength class and type.
DANGER
Danger to life due to live system
Death or serious injury will occur.
Always shut down the gear unit and any oil supply system (whether separate or mounted on
the gear unit) before you carry out any work. Secure the drive unit against being operated
accidentally as follows:
● Turn off the key-operated switch.
● Remove the fuses in the power supply.
● Attach a notice to the start switch, clearly stating that work is being carried out on the gear
unit.
Ensure that the entire unit is load-free so that no danger is posed when you start to dismantle
components.
Reactivating the gear unit
When installing the gear unit in machines or systems, the machine or system manufacturers
must ensure that the regulations, notes and descriptions contained in these operating
instructions are incorporated in their own operating instructions.
Safety instructions
2.6 Intended use
REDUREX Gear unit 5200en
20
Operating Instructions 03/2019